world shipping - free in Canada

Be ready for everything

by Louis Desrosiers December 05, 2016

Urbann's modular design helps you plan for the future

Difficult to predict the future. Will you need a microphone? two? an electrical outlet? Avoid headaches. The modular design of our lecterns is the answer we have all been waiting for.

How we plan for the future

The future is full of promises. The same with our lecterns! Almost all of our models can accommodate a family of accessories that you can install whenever you want.

How does it work?

The lecterns have factory made openings and blank plates cover these holes.
To add functions to a lectern, simply put the corresponding module in place of these plates.

Add or remove modules whenever you want, this is the beauty of great design.

Urbann modularity system on lecterns

Reading lamp

You would like a reading lamp on the lectern?

1. Remove the blank plate by removing 2 screws.
2. Secure the lamp in place with the 6 screws provided.
The wire of the lamp will go down inside the lectern.

Installation of a reading lamp on a lectern from Urbann

Installing a microphone connector

Installing a microphone connector is just as simple and can be done left or right. No welding, no drilling, the lectern is factory ready.

1. Remove the blank plate by removing 2 screws.
2. Secure the module plate with the 2 screws provided.
An audio cable is also provided with the module and clips under the plate (and goes down inside the lectern)!

Installation of a microphone connector on a lectern from Urbann

Installing a microphone support

Installing a microphone support is just as simple and can be done left or right. No drilling, the lectern is factory ready.

1. Remove the blank plate by removing 2 screws.
2. Secure the module plate with the 2 screws provided.

Installation of a microphone support on a lectern from Urbann

Installing an electrical outlet 

Installing an electrical outlet is just as simple and can be done left or right. No welding, no drilling, the lectern is factory ready.

1. Remove the blank plate by removing 2 screws.
2. Place the module plate
3. Put down the electrical plug and secure it in place with the large clamping ring under the tray (no tools required!).
The electrical cable will pass inside the lectern!

Installation of an electrical outlet on a lectern from Urbann

Installing a grommet

Installing an electrical outlet is just as simple and can be done left or right.
No drilling, the lectern is factory ready.

1. Remove the blank plate by removing 2 screws.
2. Secure the grommet with the 4 screws provided.

Installation of a grommet on a lectern from Urbann

Installing a microphone shockmount support

Installing a microphone shockmount support is just as simple and can be done left or right. No welding, no drilling, the lectern is factory ready.

1. Remove the blank plate by removing 2 screws.
2. Secure the module plate with the 4 screws provided.
An audio cable is also provided with the module to clip your microphone into it (the cable goes down inside the lectern)!

Installation of a microphone shockmount support on a lectern from Urbann




Louis Desrosiers
Louis Desrosiers

Author




Also in News

New versions, 2X the fun!

by Louis Desrosiers June 21, 2018

You can now do more with the recently upgraded top panels of many lecterns. Check them out!

Read More

North Pole scanner - what is the next event?
North Pole scanner - what is the next event?

by Paul Media December 20, 2016

Read More

15 simple tips you can't miss out for becoming a great speaker (final)

by Louis Desrosiers September 27, 2016

Read More